What are the Warning Lamps on the Vehicle Dashboard and their Meanings?

Warning lamps on the vehicle dashboard provide drivers with important information about the vehicle's status. These lamps can be in three different colors, red, yellow and green.

Red warning lampsindicates that there is a serious problem and the vehicle must be stopped immediately. When these lights are on, drivers must safely stop the vehicle as soon as possible.

yellow warning lampsindicates that there is a potential problem and that the vehicle should be serviced as soon as possible. When these lights are on, drivers should continue to drive, but should seek service as soon as possible.

Red Warning Lamps (Warning Vehicle Indicators)

1- Overtemperature Warning Lamp

The Overtemperature Warning Lamp means that the engine coolant temperature is higher than it should be. If the engine coolant temperature becomes too high, the engine can be seriously damaged. Therefore, when the temperature light comes on, it is necessary to stop the vehicle immediately and wait for the engine to cool.

The temperature light is shaped like a thermometer symbol and is usually located in the middle of the instrument panel. The light flashes red or orange.

Some of the reasons that may cause the temperature warning light to come on are:

• Lack of coolant
• Coolant leak
• Radiator fan not working
• Malfunction of the thermostat
• Malfunction of the pump

When the temperature light is on, you need to follow the steps below:

1. Stop the vehicle immediately.
2. Wait for the engine to cool.
3. Check the coolant level. If coolant is missing, add it.
4. Check for coolant leaks.
5. Check if the radiator fan is working.
6. Check the thermostat.
7. Check the pump.

After performing these checks, if the temperature light is still on, you should take your vehicle to a workshop.

2- Battery System Warning Lamp

The Battery System Warning Light indicates that there is a problem with the battery or the battery is discharged. This lamp is usually in the form of a battery symbol and is usually located in the middle of the instrument panel.

When the Battery System Warning Light is on, drivers should follow the steps below:

1. Stop the vehicle safely.
2. Check the battery terminals. If terminals are loose or oxidized, tighten or clean.
3. Check battery voltage. If the voltage is low, charge or replace the battery.

Some of the causes that may cause the Battery System Warning Lamp to come on are:

• Battery discharge
• Loose or oxidized battery terminals
• There is a problem with the battery cables
• There is a fault in the battery
• Malfunction of the alternator

When the Battery System Warning Light comes on, drivers should take the vehicle to a workshop if they are unable to fix the problem on their own.

3- Oil Pressure Warning Lamp

The Oil Pressure Warning Lamp indicates that the engine oil pressure is less than it should be. Engine oil is necessary to lubricate the moving parts of the engine and prevent wear. When oil pressure is low, engine parts cannot be lubricated properly, which can cause serious damage or stop the engine completely.

The Oil Pressure Warning Light is usually shaped like an oil can symbol and is usually located in the middle of the instrument cluster. This lamp may flash red or yellow or be solid.

When the Oil Pressure Warning Lamp is on, drivers need to follow the steps below:

1. Stop the vehicle safely.
2. Turn off the engine.
3. Check the engine oil level. If the engine oil level is low, add oil.
4. Start the engine and make sure the oil pressure lamp is off.

If the Oil Pressure Warning Light remains on, drivers should take the vehicle to a workshop.

Some of the reasons that may cause the Oil Pressure Warning Lamp to come on are:

• Low engine oil level
• Clogged oil filter
• A fault in the oil pump
• There is a fault in the engine

Continuing to drive when the Oil Pressure Warning Light is on can cause serious damage. Therefore, it is important not to ignore this lamp and get the problem fixed immediately.

4- Brake Warning Lamp

The brake warning lamp is a lamp that warns drivers that there is a problem with the vehicle's brake system. The brake warning lamp is usually in the form of a red brake symbol and is usually located in the middle of the instrument panel.

When the brake warning light is on, drivers must safely stop the vehicle and check the braking system. Some of the reasons that may cause the brake warning lamp to come on are as follows:

• Low brake fluid level
• Wear of brake pads
• Wear of brake discs
• Damage to brake hoses or pipes
• A malfunction in the brake pedal mechanism

Continuing to drive when the brake warning light is on can cause serious accidents. Therefore, it is important not to ignore this lamp and get the problem fixed immediately.

When the brake warning lamp is on, drivers need to follow the steps below:

1. Stop the vehicle safely.
2. Check the brake fluid level. If the brake fluid level is low, add brake fluid.
3. Check the brake pads. If the brake pads are worn, replace the brake pads.
4. Check the brake discs. If the brake discs are worn, replace the brake discs.
5. Check the brake hoses or pipes. If the brake hoses or pipes are damaged, replace the brake hoses or pipes.
6. Check the brake pedal mechanism. If there is a fault in the brake pedal mechanism, you should take the vehicle to a workshop.

If, after performing these checks, the brake warning lamp is still on, you should take the vehicle to a workshop.

Yellow Warning Lamps (Safety Vehicle Indicators)

1- Tire Pressure Warning Lamp

The tire pressure warning lamp is a lamp that indicates a decrease in the vehicle's tire pressure. Tire pressure directly affects the handling and safety of the vehicle. When the tire pressure is low, the vehicle's grip decreases, increasing the risk of an accident.

The tire pressure warning lamp is usually in the form of a tire symbol and is usually located in the middle of the instrument panel. This lamp may flash red or yellow or be solid.

When the tire pressure warning light is on, drivers must safely stop the vehicle and check their tire pressures. Some of the reasons that may cause the tire pressure warning lamp to come on are:

• Low tire pressure
• Damage to tires
• Changing tires
• A malfunction in the tire pressure sensors

Continuing to drive when the tire pressure warning light is on can cause serious accidents. Therefore, it is important not to ignore this lamp and get the problem fixed immediately.

When the tire pressure warning lamp is on, drivers should follow the steps below:

1. Stop the vehicle safely.
2. Check tire pressures. If the tire pressure is low, increase the tire pressure.
3. If the tires are damaged, replace your tires.
4. If there is a fault with the tire pressure sensors, you will need to take the vehicle to a workshop.

If, after performing these checks, the tire pressure warning lamp is still on, you should take the vehicle to a workshop.

To prevent the tire pressure warning lamp, you should regularly check the tire pressure values ​​recommended by your vehicle manufacturer.

2- ESC/ESP Warning Lamp

ESC (Electronic Stability Control) or ESP (Electronic Stability Control) is a vehicle safety system that helps prevent the vehicle from skidding. ESC works by controlling the vehicle's speed, braking system and steering system.

The ESC warning lamp indicates that the ESC system is disabled or faulty. This lamp is usually shaped like a car symbol and is usually located in the middle of the instrument panel.

When the ESC warning lamp is on, drivers must safely stop the vehicle and check the ESC system. Some of the reasons that may cause the ESC warning lamp to come on are as follows:

• Disabling the ESC system
• There is a fault in the ESC system

Continuing to drive when the ESC warning lamp is on may result in serious accidents. Therefore, it is important not to ignore this lamp and get the problem fixed immediately.

When the ESC warning lamp is on, drivers need to follow the steps below:

1. Stop the vehicle safely.
2. Check if the ESC system is disabled. If the ESC system is disabled, enable the ESC system.
3. Check for a fault in the ESC system. If there is a fault in the ESC system, you must take the vehicle to a workshop.

To disable the ESC system, you can use the ESC button, which is usually located on the instrument panel. You can use the same button again to activate the ESC system.

If you think the ESC system is faulty, you should take the vehicle to a workshop.

3- Steering Lock Warning Lamp

Steering wheel lock warning light is a light that indicates that your steering wheel is locked and cannot be moved. The steering lock is a security feature that helps protect your vehicle from theft. It is automatically activated when you turn off the ignition. To disable the steering lock, insert the key in the ignition switch and try to turn your steering wheel a full turn at least once.

When the steering lock warning lamp comes on, one of the following may occur:

• Steering lock is deactivated.
• There is a fault in the steering lock.
• Steering shaft may be worn or damaged.
• The steering wheel connection may be loose or damaged.

Note that your vehicle cannot be driven safely when the steering lock warning lamp is on. Therefore, it is important that you take your vehicle to a workshop and have the problem fixed.

Possible risks that the steering lock warning lamp may illuminate are as follows:

• Theft of your vehicle
• accident hazard

When the steering lock warning lamp comes on, it is important to ensure that the problem is corrected before driving your vehicle.

4- Trailer Drawbar Warning Light

The trailer tow bar warning light is a light that indicates a problem with the tow bar system when your vehicle is towing a trailer or caravan. This lamp is usually shaped like a caravan symbol and is usually located in the middle of the instrument cluster.

When the Dorsey tow ball warning light comes on, one of the following can happen:

• Loose or damaged drawbar coupling
• A fault in the drawbar cables
• There is a fault in the drawbar system

When the Dorsey tow bar warning light comes on, it is important to have the problem rectified before using your vehicle. Otherwise, you may not be able to tow your trailer or caravan safely.

Possible risks from the Dorsey drawbar warning lamp coming on include:

• Your trailer or caravan going off the road
• accident hazard

When the Dorsey tow bar warning light comes on, it is important to have the problem rectified before using your vehicle.

Here are some reasons why the Dorsey tow ball warning light may come on:

• Loose or damaged tow bar coupling: The tow bar coupling is the link that connects the trailer or caravan to your vehicle. If this connection is loose or damaged, your trailer or caravan could go off the road.
• A fault with the tow bar wiring: The draw bar wiring is the wiring that connects the trailer or caravan to your vehicle. If these cables are faulty, your trailer or caravan may not be properly connected to your vehicle.
• Fault in the tow ball system: The tow ball system is the system that connects the trailer or caravan to your vehicle and controls the trailer or caravan. If there is a fault with this system, you may not be able to tow your trailer or caravan safely.

When the Dorsey tow ball warning light comes on, you must do the following:

• Safely stop your vehicle.
• Uncouple the trailer or caravan from your vehicle.
• Check the drawbar connection, wiring and system.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

5- Service Failure Warning Lamp

The service failure warning lamp is a lamp that indicates that your vehicle's periodic maintenance is imminent or necessary. This lamp is usually in the form of a key symbol and is usually located in the middle of the instrument panel.

When the service failure warning light comes on, it indicates that your vehicle needs regular maintenance, including oil, filters, brakes, tires and other important parts. Failure to do so can affect your vehicle's performance, fuel efficiency and safety.

Possible risks that the service failure warning lamp may illuminate are as follows:

• Failure of your vehicle
• accident hazard

When the service failure warning light comes on, you need to go to a workshop to have your vehicle serviced. The workshop will also check all other systems of your vehicle while maintaining your vehicle. This will help keep your vehicle running safely and smoothly.

Here are some reasons for the service failure warning lamp to come on:

• Your vehicle needs to be maintained
• Taking care of your vehicle zamnot done immediately
• Failure to properly maintain your vehicle

When the service failure warning lamp comes on, you must do the following:

• Go to a workshop to have your vehicle serviced.
• Find out what's involved in maintaining your vehicle before you go for service.
• Check that your vehicle has been properly maintained after service.

Service failure warning lamp, how to maintain your vehicle zamIt is an important warning that reminds you to do it now. It is important not to ignore this lamp and have your vehicle serviced.

6- Side Airbag Warning Lamp

The side airbag warning lamp is a lamp that indicates a problem with your vehicle's side airbags. This lamp is usually in the form of an airbag symbol and is usually located in the middle of the instrument panel.

When the side airbag warning lamp comes on, one of the following may occur:

• The side airbag is deactivated.
• There is a fault in the side airbag system.
• There is a fault in the side airbag sensors.
• An accident occurred in which the side airbag inflated but did not deflate.

When the side airbag warning lamp comes on, it is important to ensure that the problem is corrected before driving your vehicle. Otherwise, the side airbags will not deploy in the event of an accident, which could result in serious injury or death.

Possible risks from illuminating the side airbag warning lamp include:

• Failure of the side airbags to deploy in the event of an accident
• Serious injury or death in accident

When the side airbag warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check the side airbag system.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The side airbag system controls your vehicle's side airbags and inflates them as needed. This system helps prevent injury to the driver and passengers in the event of an accident.

The side airbag system consists of the following parts:

• Side airbags: Side airbags are airbags located on the side panels of the vehicle.
• Side airbag sensors: The side airbag sensors detect when the vehicle hits the side in the event of an accident.
• Side airbag control module: The side airbag control module receives data from the side airbag sensors and inflates the side airbags when necessary.

For the side airbag system to function properly, all parts must be in working order. When the side airbag warning lamp comes on, it indicates that one of these parts may be faulty. Therefore, it is important that you take your vehicle to a workshop and have the problem fixed.

7- Steering Warning Lamp

The steering warning lamp is a lamp that indicates a problem with your vehicle's steering system. This lamp is usually in the form of a steering wheel symbol and is usually located in the middle of the instrument panel.

When the steering warning lamp comes on, it could be one of the following:

• Low steering fluid level
• A fault in the steering hydraulic pump
• A fault in the steering gear
• A fault in the connection of the steering wheel

When the steering warning lamp comes on, it is important to ensure that the problem is corrected before driving your vehicle. Otherwise, your steering wheel may become stiff or lock up. This can lead to a risk of accident.

Possible risks that the steering warning lamp may illuminate are as follows:

• Steering stiffening or locking
• accident hazard

When the steering warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check the steering system.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The steering system is the system that controls the steering of your vehicle. This system consists of steering fluid, steering hydraulic pump, steering gear box and steering wheel.

Steering fluid is essential for the proper functioning of the steering system. If the steering fluid level is low, the steering may become stiff or locked.

The steering hydraulic pump is the pump that circulates the steering fluid. If the steering hydraulic pump has a fault, the steering fluid level will drop and the steering may become stiff or locked.

The steering gear box is the box that transmits the movement of the steering wheel to the wheels using the steering fluid. If there is a fault in the steering gear, the steering may become stiff or lock up.

The steering wheel is the part that the steering system controls. If there is a fault in the connection of the steering wheel, the steering may become stiff or lock.

For the steering system to function properly, all parts must be in working order. When the steering warning lamp comes on, it indicates that one of these parts may be faulty. Therefore, it is important that you take your vehicle to a workshop and have the problem fixed.

8- Brake Pedal Warning Lamp

The brake pedal warning lamp is a lamp that indicates a problem with your vehicle's brake system. This lamp is usually in the form of a brake symbol and is usually located in the middle of the instrument panel.

When the brake pedal warning lamp comes on, one of the following may occur:

• Low brake fluid level
• Wear of brake pads
• Wear of brake discs
• A fault in the brake switch
• Malfunction of brake servo

When the brake pedal warning lamp comes on, it is important to ensure that the problem is corrected before driving your vehicle. Otherwise, your brakes may not work properly, which may result in a risk of accident.

Possible risks of the brake pedal warning lamp coming on are:

• Brakes not working properly
• accident hazard

When the brake pedal warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check the brake system.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The brake system is the system that ensures your vehicle stops safely. This system consists of brake fluid, brake pads, brake discs, brake switch and brake booster.

Brake fluid is essential for the proper functioning of the brake system. If the brake fluid level is low, the brakes may not work properly.

Brake pads are parts that provide braking force by rubbing against the brake discs. When the brake pads are worn, the brakes may not work properly.

Brake discs are the parts that the brake pads rub against. When the brake discs are worn, the brakes may not work properly.

The brake switch is the part that transmits the pressure from the brake pedal to the brake fluid. If there is a fault in the brake switch, the brakes may not work properly.

The brake booster is the part that increases the force from the brake pedal. If there is a fault in the brake booster, the brakes may not work properly.

For the brake system to function properly, all parts must be in working order. When the brake pedal warning lamp comes on, it indicates that one of these parts may be faulty. Therefore, it is important that you take your vehicle to a workshop and have the problem fixed.

9- Parking Brake Warning Lamp

Parking brake warning lamp is a lamp that indicates that your vehicle's parking brake is applied. This lamp is usually in the form of a "Handbrake" symbol and is usually located in the middle of the instrument cluster.

When the parking brake warning lamp comes on, one of the following may occur:

• Parking brake applied
• A fault in the parking brake system
• Loose or damaged parking brake cable

When the parking brake warning lamp comes on, it is important to ensure that the problem is corrected before driving your vehicle. Otherwise, there may be a danger of accident when parking or moving your vehicle.

Possible risks that the parking brake warning lamp may illuminate are as follows:

• Releasing the parking brake while the vehicle is in motion
• accident hazard

When the parking brake warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check the parking brake.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The parking brake is a system used to hold your vehicle in place while you park or move it. This system is a cable system controlled from a lever or pedal.

The parking brake cable activates the parking brake when you pull the lever or pedal. The cable connects the brake pads to the rear wheels and the pads lock the wheels.

For the parking brake system to work properly, all parts must be in working order. When the parking brake warning lamp comes on, it indicates that one of these parts may be faulty. Therefore, it is important that you take your vehicle to a workshop and have the problem fixed.

10- Information Warning Lamp

Information warning lamp is a lamp that indicates a problem in any system of your vehicle. This lamp is usually in the form of an information icon and is usually located in the middle of the instrument panel.

When the information warning lamp is on, one of the following can happen:

• There is a problem with any system in the vehicle.
• There is a warning in a system in the vehicle.
• There is a fault in a system in the vehicle.

When the information warning lamp is on, it is important to ensure that the problem is corrected before using your vehicle. Otherwise, you may experience problems such as your vehicle not starting properly or risking an accident.

Possible risks that the information warning lamp may cause are as follows:

• A system in the vehicle not working properly
• accident hazard

When the information warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check why the information warning lamp is on.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The information warning lamp illuminates as a warning of a problem in any system of your vehicle. Therefore, it is important not to ignore this lamp and get the problem fixed.

When the information warning lamp is on, you can refer to the vehicle manual to determine the cause of the problem. In the vehicle manual, you can find information about the causes and remedies for the information warning lamp to come on.

If you have not been able to fix the problem yourself when the information warning lamp comes on, you should take your vehicle to a workshop. Service will determine the cause of the problem and fix the problem.

11- Icing Warning Lamp

The icing warning lamp is a lamp that indicates that the outside temperature of your vehicle is below 4°C and that the road may be icy. This lamp is usually in the form of an ice crystal symbol and is usually located in the middle of the instrument cluster.

When the icing warning lamp comes on, it could be one of the following:

• The outdoor temperature is below 4°C.
• The road may be icy.

When the icing warning lamp is on, it is important to be careful before driving your vehicle. Driving on icy roads can lead to dangers such as increased braking distance, difficult steering control and skidding.

Possible risks from the icing warning lamp coming on include:

• Increasing braking distance
• Difficulty in steering wheel control
• Skid
• accident hazard

When the icing warning lamp comes on, you must do the following:

• Reduce the speed of your vehicle.
• Use the brakes gently.
• Steer slowly and with control.
• Pay attention to the condition of the road.

When the icing warning light is on, it is important to be careful to drive your vehicle safely.

The icing warning lamp is controlled by a sensor that detects the outside temperature of your vehicle. This sensor turns on the icing warning lamp when the temperature drops below 4°C.

The icing warning lamp is a warning lamp that you should be especially careful with in the winter months. When driving on icy roads, zamYou should be more careful at the moment and remember that the braking distance will increase.

12- Fuel Cap Warning Lamp

Fuel cap warning light is a light that indicates that your vehicle's fuel cap is open. This lamp is usually in the form of a fuel pump symbol and is usually located in the middle of the instrument cluster.

When the fuel cap warning light comes on, one of the following could happen:

• The fuel cap is open.
• The fuel cap is not completely closed.
• The fuel cap lock is faulty.

When the fuel cap warning light is on, it is important to check the fuel cap before driving your vehicle. If the fuel cap is open, close the cap and wait for the warning lamp to go out. If the fuel cap does not close completely, press the cap firmly with your hand and wait for the warning lamp to go out. If the fuel cap lock is faulty, you will need to take your vehicle to a workshop.

Possible risks that the fuel cap warning lamp may illuminate are as follows:

• fuel leak
• accident hazard

When the fuel cap warning light comes on, you must do the following:

• Safely stop your vehicle.
• Check the fuel cap.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The fuel cap warning light is an important warning light for the safety of your vehicle's fuel system. Driving with the fuel cap open can cause fuel leakage and an accident hazard. Therefore, when the fuel cap warning light comes on, it is important that you correct the problem immediately.

13- Traction Control Warning Lamp

The traction control warning lamp is a lamp that indicates a problem with your vehicle's traction control system. This lamp is usually shaped like a wheel symbol and is usually located in the middle of the instrument cluster.

The traction control system is a system that helps prevent the wheels of your vehicle from slipping. The system uses sensors that detect the speed of your vehicle's wheels. If one of the wheels starts to slip, the system prevents slipping by reducing engine torque or activating the wheel's brakes.

When the traction control warning lamp comes on, it could be one of the following:

• The traction control system is disabled.
• There is a fault in the traction control system.

When the traction control warning lamp comes on, it is important to ensure that the problem is corrected before using your vehicle. Otherwise, you may experience problems such as your vehicle slipping and risking an accident.

Possible risks from the ignition of the traction control warning lamp include:

• Vehicle slipping
• accident hazard

When the traction control warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check why the traction control system is lit.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The traction control system is an important system for the safety of your vehicle. When the traction control warning lamp comes on, it is important that you correct the problem immediately.

Here are some reasons for the traction control warning lamp to come on:

• Malfunction of one of the wheel speed sensors
• A malfunction in the computer of the traction control system
• A problem in the electrical circuit of the traction control system

When the traction control warning lamp comes on, you can refer to the vehicle manual to determine the cause of the problem. In the vehicle manual, you can find information about the causes and remedies for the traction control warning lamp to come on.

If you have not been able to fix the problem yourself when the traction control warning lamp comes on, you should take your vehicle to a workshop. Service will determine the cause of the problem and fix the problem.

14- Follow Distance Warning Lamp

The following distance warning lamp is a lamp that indicates that the distance to the vehicle in front of your vehicle has fallen below a safe level. This lamp is usually in the form of a collision symbol and is usually located in the middle of the instrument cluster.

The following distance warning lamp detects the speed and distance of the vehicle in front of your vehicle using radar, camera or ultrasound sensors. When the distance to the vehicle in front of your vehicle drops below a safe level, the following distance warning lamp will turn on and a warning chime will sound.

The following distance warning lamp is an important warning system for safe driving. This lamp helps you control the distance to the vehicle in front of your vehicle and avoid a possible collision.

Here are some reasons for the following distance warning lamp to come on:

• If the distance to the vehicle in front of your vehicle drops below a safe level
• Failure of one of the sensors of the following distance warning system
• There is a problem in the circuit of the following distance warning system

When the following distance warning lamp is on, you must do the following:

• Reduce the speed of your vehicle.
• Increase the distance from your vehicle to the vehicle in front of it.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The following distance warning system is an important system for the safety of your vehicle. When the following distance warning lamp comes on, it is important that you correct the problem immediately.

15- ABS Warning Lamp

The ABS warning lamp is a lamp that indicates a problem with your vehicle's anti-lock braking system. This lamp is usually shaped like a wheel symbol and is usually located in the middle of the instrument cluster.

The ABS system is a system that helps prevent your vehicle from losing control by preventing the wheels from locking during sudden braking. The ABS system uses sensors that detect wheel speeds. If the wheels start to lock up, the ABS system reduces the brake pressure to the wheels for short periods, allowing the wheels to continue to turn.

When the ABS warning lamp comes on, one of the following can happen:

• The ABS system is disabled.
• There is a fault in the ABS system.

When the ABS warning lamp is on, it is important to ensure that the problem is corrected before driving your vehicle. Otherwise, you may experience problems such as losing control of your vehicle and risking an accident.

Possible risks that the ABS warning lamp may cause are as follows:

• Losing control of the vehicle
• accident hazard

When the ABS warning lamp comes on, you must do the following:

• Safely stop your vehicle.
• Check why the ABS system is lit.
• In cases where the problem cannot be fixed, you should take your vehicle to a workshop.

The ABS system is an important system for the safety of your vehicle. When the ABS warning lamp comes on, it is important that you correct the problem immediately.

Some reasons for the ABS warning lamp to come on are as follows:

• Malfunction of one of the ABS sensors
• Malfunction of the ABS control unit
• A problem with the ABS electrical circuit

When the ABS warning lamp comes on, you can refer to the vehicle manual to determine the cause of the problem. In the vehicle manual, you can find information about the causes and solutions for the ABS warning lamp to come on.

If you couldn't fix the problem yourself when the ABS warning lamp comes on, you should take your vehicle to a workshop. Service will determine the cause of the problem and fix the problem.