Tips and Tricks for Sealing with Silicone


Silicone is a widely used material in sealing and bonding processes. It is a frequently used solution especially in the construction industry, in wet areas such as bathrooms and kitchens, and in plumbing works. The correct use of silicone is one of the most important keys to success in sealing and bonding operations.

silicone sealantIt is one of the most preferred materials in sealing processes. It stands out especially with its resistance to temperature differences, water resistance and easy applicability. However, it can cause undesirable results if not used correctly. Before using silicone sealant, make sure that the surface is clean and dry. In addition, a suitable silicone selection should be made for the type of surface on which the silicone sealant will be applied.

Sealing with silicone It is important to use the right techniques while performing the procedure. First, it must be ensured that the surface to be sealed is clean, dry and oil-free. Then, cut the silicone from the tip you will squeeze at an angle of at least 45 degrees and start applying it to the surface. Apply light pressure to spread the silicone over the surface and seal the required areas. During this process, avoid using too much of the silicone and be careful not to spread it evenly.

Right Silicone Sealant selection is also very important in the sealing process. Silicone to be used in high pressure areas such as plumbing must provide high durability and tight sealing. Silicones to be used in wet areas such as bathrooms or kitchens must be water resistant and resistant to mold growth.

Finally, it is very important to get professional help for the correct use of the silicone and the sealing process. Experts can successfully complete the sealing process with the right material selection, application technique and quality workmanship.

Silicone SealantIt is one of the most frequently used materials in sealing and bonding processes. However, undesirable result if not used properly.

Related Ads